previous arrow
next arrow
previous arrow
next arrow
previous arrow
next arrow

Specifications

Manufacturer:

Caterpillar

Model:

D5G

Year:

2007

Condition:
Used
Hours:

8212

Description

New Midwestern M520 pipe layer kit installed

Fully serviced ready to work.

New track segments

Recently certified

 
Specifications 
Ripper 
Ripper TypeParallelogram
Number Of Shanks3
Maximum Digging Depth13.3in
Maximum Reach - Ground Line24in
Maximum Ground Clearance Under Tip16.2in
Overall Width67.3in
Height6.5in
Weight1241lb
  
Engine 
Engine Model3046T
Gross Power99hp
Net Power90hp
Displacement305cu in
Bore3.7in
Stroke4.7in
Engine ModelCat 3046T
Eec 80/126990hp
Sae J134990hp
Iso 924990hp
Power - Gross99hp
Power - Net90hp
Caterpillar90hp
  
Operational 
Operating Weight20547.1lb
Fuel Capacity49.5gal
Cooling System Fluid Capacity4.3gal
Engine Oil Capacity3.5gal
Final Drives Fluid Capacity3.9gal
  
Transmission 
Max Speed - Forward5.6mph
Max Speed - Reverse6mph
Drive Pumps2
Track Motors2
Relief Valve Settings6380 psi
Maximum Travel Speed - Forward5.6mph
Maximum Travel Speed - Reverse6mph
  
Weights 
Operating Weight - Lgp20434lb
Operating Weight - Xl19662lb
  
Blade 
Blade Width - Xl105.9in
Blade Width - Intermediate115in
Blade Width - Lgp128.1in
Blade Height - Xl43.3in
Blade Height - Intermediate40.5in
Blade Height - Lgp40.5in
Blade Capacity - Xl2.9yd3
Blade Capacity - Intermediate2.8yd3
Blade Capacity - Lgp3.1yd3
Digging Depth - Xl24.8in
Digging Depth - Intermediate22.9in
Digging Depth - Lgp22.9in
  
Standard Blade 
Width8.9ft in
Height43.4in
Capacity2.9yd3
Blade Angle (Both Directions)25degrees
Cutting Depth24.9in
  
Service Refill Capacities 
Cooling System4.3gal
Fuel Tank48.6gal
Final Drive - Each - Lgp5.7gal
Final Drive - Each - Xl3.9gal
Crankcase - With Filter3.4gal
Transmission - Hydraulic Tank12gal
  
Standards 
RopsSAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95
FopsSAE J231-JAN81, ISO 3449-92
  
Hydraulic Controls 
Pump Output16.1 gal/min
Relief Valve Setting2900 psi
  
Winch 
Winch DriveHydrostatic
ControlPilot hydraulic
Overall Width29.2in
Drum Diameter10in
Drum Width10.8in
Rope Diameter - Recommended0.7in
Weight1345lb
Rope Diameter - Optional0.8in
SpeedVariable
Winch Length27.8in
Throat Clearance6.8in
Drum Capacity - Recommended Cable371ft in
Drum Capacity - Optional Cable257ft in
Maximum Line Pull - Bare Drum40000lb
Maximum Line Pull - Full Drum25000lb
Maximum Line Speed - Bare Drum132 ft/min
Maximum Line Speed - Full Drum207 ft/min

Documents

  • *Documents not available
Share:
Contact Us

Related Posts

Contact Us
First
Last

Contact Us

Copyright Dewitt Equipment Remarketing 2021.  Powered by Vizybility DMS